Jump to content


Photo

Wall\floor Sprites - Top Down


  • Please log in to reply
6 replies to this topic

#1 Shiin

Shiin

    GMC Member

  • GMC Member
  • 188 posts

Posted 24 December 2009 - 03:55 PM

ALL SPRITES in PNG format.

REQUEST - WALL SPRITES
50x50, Stone, Brick, Wood Plank

I'm looking for Wall Sprites, Top Down, 3D Imitation.
Vertical Walls (up\down) should have both SIDES and TOP view
Horizontal Walls (left\right) should have same as above, only rotated 90 deg
Specifics on size within 25x25, 7 pixels for the sides, 11 pixels for the top.
I will also need Corner Wall Sprites, also, 25x25 with same specifics as above.

LIGHTING --- Walls should have imitated lighting (tiles should be designed as if light was cast from the North East towards the South West.

Example:
Vertical Wall --- try to imagine this as an image lol.
|X|---|X|
|X|---|X|
|X|---|X|
X's are the left and right side, --- is the top.

Horizontal Wall --- Just rotate the Vertical 90 deg
Bottom Left Corner wall --- Just take the NW half of the Vertical Wall and slap it on the NW half of the Horizontal wall
(with the lighting taken into account)


FLOOR TILE --- I need 50x50 floor tiles ... Cobble Stone, Brick, Rock, Grass and Animated Very Light Blue Water.



I appreciate any help.

If you need more specifics, please ... Just Ask.

Edited by Shiin, 24 December 2009 - 04:07 PM.

  • 0

#2 javierkos

javierkos

    GMC Member

  • GMC Member
  • 715 posts

Posted 24 December 2009 - 03:58 PM

Posted Image

Is the brick wall ok?
  • 0
---------------------------------------------------------

Xtreme Game Maker

#3 Shiin

Shiin

    GMC Member

  • GMC Member
  • 188 posts

Posted 24 December 2009 - 04:28 PM

Posted Image

Is the brick wall ok?


No.

I tried 10 times to upload some mock ones I made for place holders, but ImageShack is being gey and wont generate the code for forums.


Lets try again ....
a 50x50 square wall, North\South Orientation
with its LEFT and RIGHT side visible as well as the TOP, like ZELDA, where certain objects you can see all sides and the top.

I changed from 25x25 to 50x50 because it was too small.


Bricks need to be grey in color.
  • 0

#4 WMCD

WMCD

    Spritist

  • GMC Member
  • 1422 posts
  • Version:GM5

Posted 24 December 2009 - 06:23 PM

Hey man, I get what you're saying: you want a top-down view, but skewed so that thesides of objects are visible.

This is one of my favorite views, and I'll try to get one or two done later, but no promises (Christmas Eve's a busy time :) )
  • 0

#5 Grey Matter

Grey Matter

    GMC Member

  • GMC Member
  • 236 posts

Posted 24 December 2009 - 06:24 PM

The sprites that come with GM8 have several TD wall sets.
  • 0

#6 Shiin

Shiin

    GMC Member

  • GMC Member
  • 188 posts

Posted 24 December 2009 - 07:02 PM

Hey man, I get what you're saying: you want a top-down view, but skewed so that thesides of objects are visible.

This is one of my favorite views, and I'll try to get one or two done later, but no promises (Christmas Eve's a busy time :) )


No Problem.
No Rush.

I can draw in 3 or 4 colors but aside from that ... My TDS would look like weak-sauce.



The sprites that come with GM8 have several TD wall sets.


Send me some then ... lol.
If I get time i'll see about d/l GM8, but hopefully I don't have to install just to get to them.
  • 0

#7 shishir_kumar_kolkata

shishir_kumar_kolkata

    GMC Member

  • New Member
  • 2 posts

Posted 08 March 2010 - 09:45 AM

Posted Image

Is the brick wall ok?


you can go to this website: http://www.davegh.com/blade/davegh.htm
  • 0