Tablet Dll
#21
Posted 04 October 2008 - 04:55 PM
#22
Posted 05 October 2008 - 12:22 AM
Here you go.
http://www.mediafire...php?4mznmnnnjtx
Now to test this out
#23
Posted 25 October 2008 - 04:28 AM
Edited by mrsmes, 25 October 2008 - 04:31 AM.
#24
Posted 27 October 2008 - 07:15 PM
Sounds like a very sensetive way to do it.this could be used for a form of pressure switch to enhance security systems, and show the results of the pressure replaced with the appropriate pressure required and trigger a alarm set off a security alert... if this tablet DLL is used... I'll have to remember this for my security system at home, or in my own company one day... the more pressure switches and mechanisms being used for security the harder it will make it for the intruder to escape, but it can proove making it impossible for the intruder to escape so long as there are more than enough security control and detection devices put in place...
#25
Posted 11 November 2008 - 04:39 AM
-IMP
#26
Posted 02 December 2008 - 09:18 PM
of the things that were unanswered in the first post that might help everyone:
tabletType : 1=Pen Mode 2=Eraser Mode
tabletButtons : Detects single buttons and button combinations, here's the results for my Intuos2:
1= Pen/Eraser contact (Also shows up as a left mouse click)
2= Side Bottom Button Clicked
3= Side Bottom Button Clicked + Pen/Eraser contact
4= Side Top Button Clicked
5= Side Top Button Clicked + Pen/Eraser contact
tabletTPressure : Couldn't get anything to show up, the wacom "6D" pen has full 360 tilt detection, it might be related to that.
tabletZindex : I imagine this is only used if you are using the pricey but awesome airbrush (http://www.wacom.com...Accessories.cfm)
If you ever update this again, the only thing it could use is a function for the tilt angle.
#27
Posted 14 December 2008 - 04:07 PM
#28
Posted 03 April 2009 - 12:33 AM
#29
Posted 23 May 2010 - 04:17 PM
Edited by zero44, 23 May 2010 - 06:11 PM.
#30
Posted 17 December 2010 - 09:39 PM
I know it's an old topic, but I'm very interested by this DLL.
Could someone post (upload) the dll again , please ?
The link is broken
Thank you very much.
Edited by blendman, 17 December 2010 - 09:41 PM.
#31
Posted 14 March 2011 - 12:57 AM
Edit:
Be wary as I may take a very long time to reply...
Edited by dark_master4, 14 March 2011 - 12:58 AM.
#32
Posted 14 March 2011 - 04:50 AM
#33
Posted 19 March 2011 - 10:20 PM
#34
Posted 20 March 2011 - 02:13 AM
#35
Posted 28 March 2011 - 10:59 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users











